This tyre is a suitable replacement for all Mountain Buggy 12" tyre rims.
This is the new thin tyre from Mountain Buggy, but will replace the thick tyre. If you are replacing a rear wheel from a thick to a thin tyre, it is recommended to change both sides.
Care Instructions:
Keeping the tyre inflated to the correct pressure will extend the life of the tyre and will lower the risk of damage.
- A tyre inflated too high will risk exploding and deforming the rim.
- A tyre inflated too low will risk damaging the valve as the tyre will move separately to the rim. Too low will also take more effort to push.
For the correct pressure see the side of the tyre, usually 18-20psi, or feeling like a ripe avocado when squeezed.
Use only a hand or foot operated pump to avoid damage, check with a tyre gauge if you have one available.
Do not use an air compressor / gas station pump as they are designed for car tyres. Your pram tyre will burst and damage the rim.
Baby Barn Discounts is an authorised Mountain Buggy / Phil&Teds retailer.
Thanks goodness the tire came quickly and was perfect for my urban jungle, so bub and I are back in action. Received the package within 2 days and so relieved as my pram was unusable without it. The cost was fantastic in comparison to other Internet sites including mountain buggy themselves